Our Facilities
 | Our facility is over 65,000 square feet, and is located at 5112 Evanston Avenue in Muskegon, Michigan. OFFICE HOURS: |
Tolerances and Capabilities
Click below to download our Investment Casting Quick Reference Guide. Inside, you’ll find:
- Dimensional Tolerances
- Capabilities
- Design Recommendations
- Materials Poured
Equipment
Note: PDF file will open in a new window.
List last updated August 2016
EPCP Facilities
- 67,500 Sq. Ft. Manufacturing and Warehouse Facility
Wax Injection Equipment
- 6 MPI 20 Ton Paste Wax Injection Machines
- 2 MPI 20 Ton Paste Wax Injection Machines
- 2 MPI 25 Ton Paste Wax Injection Machine
- MPI 50 Ton Paste Wax Injection Machine
- MPI 12 Ton Automatic Wax Injection Machine
- Chiller
Dip & Molding Equipment
- 2 Romco Fluidized Beds
- 5 Ceramic Dip Tank Systems
- 2 Rainfall Sanders
- Climate Controlled Ceramic Drying Room
- 2 Pneumatic Mold Manipulators
- Fanuc Robot & Mold Conveyor System
- 2 48 x 60 Autoclave Units
Melting & Pouring Equipment
- Pillar Mark VIII, 250 KW, 500 lb. & 1,000 lb. Induction Furnace
- Pillar Mark VIII, 250 KW Power Unit with 300 lb., 500 lb.,
& 1000 lb. Furnaces - Pillar Mark VIII, 300 KW, 500 lb. & 1000 lb. Induction Furnaces
- 7 Ceramic Mold Preheat Ovens
Cleaning & Finishing Equipment
- Herschal Knockout Hammer
- 2 Ramco Ceramic Leach Tanks
- Pressure Blast Cabinet
- 2 Ruemelin Sand Blast Cabinets
- 2 Goff Tumbleblast – 6 Cubic Foot
- Wheelabrator Tumbleblast – 3 Cubic Foot
- Goff Tumbleblast – 1 Cubic Foot
- Ener-Pac 5 Ton Press
- Dake – 25 Ton Press
- 2 Double End Belt Grinders
- Techmatic Rise & Fall Grinder
- AW Bell Belt Grinder
- AW Bell Saw
- Hot Pressing Oven
Quality Control & Testing Equipment
- Willson 3JR Rockwell Hardness Tester
- Detroit Testing Machine PH-1 Brinell Hardness tester and Newage Brinell Scope
- Full ceramic testing laboratory
- Continuous temperature and humidity recording of shellroom and drying room environment
- Continuous temperature recording of mold burn-out/pre-heat oven temperatures
- Pantak HF320 X-Ray System capable of foundry-control radiographic testing of up to 2” thick steel
- 2 Leco GDS-500A Spectrometers capable of analyzing ferrous and non-ferrous alloys
- Assorted measurement equipment for dimensional inspection including pin gages, calipers, surface plates, and custom-designed gages
- Brown & Sharpe CMM with PC-DMIS
- Creaform ExaScan 3-D scanner with GeoMagic Inspection
- One seat of Solidworks 3-D modeling software
- One seat of MagmaSoft Casting Simulation Software